Event PA System

1. Safely get the following from storage
   • 2 Speakers
   • 2 Stands
   • 1 Mixer
   • 1 box of audio & power cables
2. Set speakers on stands
3. Configure speakers to have main volume & input 1 at 50% volume
4. Connect mixer
   • to power
   • to AUX providing device
   • to microphones
5. Connect each speaker's input 1 to mixer using the stereo 1/4" to 2x XLR adapter
6. Connect your media source (iPad / phone / anything with a headphone jack) to the sound board

NOTE If raining, cover each speakers with a plastic bag