Procedure - Asheboro

Startup - Asheboro

1. Press the START button on the Power Sequencer at the top of the booth's rack
2. Give 1-2 minutes for equipment to turn on
3. After the mixing console has powered on, set it to layer D by pressing the labeled button at the far left of the console
   • This brings up the default layer that is applicable for most circumstances
4. (If Live Translation) Unplug the micro-usb power cable from the translation sending unit and press the center button for 2 seconds to turn it on
5. Go onstage and turn on any plug strips that are needed for instruments in that service
   1. Asheboro has 5 onstage
   2. Liberty has 3 onstage

Shut Down – Asheboro

1. Safe shutdown mixing console (SQ7)
   1. Press Processing button on screen (1 or 2 times) so that Shut Down button shows on touch screen, then press that and select Yes to confirm
2. Safe Shutdown LED Screens (halfway down the rack)
   1. Press power button on front, then turn encoder to the right and press it in to select Yes
3. (If Live Translation) Plug the translation sending unit power back in
4. After all safe shutdowns, THEN it is safe to press the START button on the Power Sequencer.
   1. It will kill power to all sound system components, including the amps, in the correct order
5. Turn off the onstage plug strips that were turned on before service