Procedure - Ed Building

Startup - Ed Building

1. Flip Top left power switch on the sound booth rack
2. Press 25 on the effects rack to enable the vocal reverb
3. Flip the breaker in the grey metal box on the right side of the stage
4. Use the small projector remote and stand in front of each projector, then press the power button

Shutdown

1. Use the small projector remote and stand in front of each projector, then press the power button 2 times  2. You will see popup on the screens
2. Flip the breaker in the grey metal box on the right side of the stage
3. Flip Top left power switch on the sound booth rack

Troubleshooting

• The TV isn't working!
  • Fully quit then reopen ProPresenter.
  • Then check the HDMI cable from the PC to the TV, may need re-plugging
• The Stage lights aren't on!
  • Check the blackout button (bottom right) on the DMX controller
  • The faders are in 4 sets of 4, each set controlling the lights aimed at the stage
    • Red, Green, Blue, Warm White
  • You can use the "master A/B" faders to turn down all the lights after configuring them