Procedure - Liberty

Startup - Liberty

1. Flip the black power switch top right of the booth's rack, give a few moments for things to turn on
2. The top layers on the left and right side of the board are the default and are applicable for most circumstances
   • CH 1-16
   • GROUP DCA 1-8
3. (If Live Translation) Unplug the micro-usb power cable from the translation sending unit and press the center button for 2 seconds to turn it on
4. Turn on the leftmost light switch behind the door on left side of the stage to turn on the stagebox & speakers
5. Go onstage and turn on any plug strips that are needed for service

Shut Down - Liberty

1. Turn off the leftmost light switch behind the door on left side of the stage to turn off the stagebox & speakers
2. Safe shutdown mixing console (X32)
   1. press Setup button right of the screen
   2. use page select arrows to go to "global" page
   3. use leftmost encoder to select SHUTDOWN
   4. press in encoder to select
3. Safe Shutdown LED Screens (halfway down the rack)
   1. Press power button on front, then turn encoder to the right and press it in to select Yes
4. (If Live Translation) Plug the translation sending unit power back in
5. After all safe shutdowns, THEN it is safe to flip the black power switch we started with to turn off sound equipment in the booth
6. Turn off the onstage plug strips that were turned on before service